← Back
Editing: icu-config-64
#!/bin/sh ## -*-sh-*- #set -x # BEGIN of icu-config-top # Copyright (C) 2016 and later: Unicode, Inc. and others. # License & terms of use: http://www.unicode.org/copyright.html #****************************************************************************** # Copyright (C) 1999-2013, International Business Machines # Corporation and others. All Rights Reserved. #****************************************************************************** # This script is designed to aid configuration of ICU. # rpath links a library search path right into the binaries. # # Note: it's preferred to use the .pc files rather than icu-config. # ### END of icu-config-top ## Zero out prefix. execprefix= prefix= loaddefs() { # Following from icu/icu4c/source/config/Makefile.inc # Copyright (C) 2016 and later: Unicode, Inc. and others. # License & terms of use: http://www.unicode.org/copyright.html ## -*-makefile-*- #****************************************************************************** # Copyright (C) 1999-2014, International Business Machines # Corporation and others. All Rights Reserved. #****************************************************************************** # This Makefile.inc is designed to be included into projects which make use # of the ICU. # CONTENTS OF THIS FILE # 1). Base configuration information and linkage # 2). Variables giving access to ICU tools # 3). Host information # 4). Compiler flags and settings # 5). Data Packaging directives # 6). Include of platform make fragment (mh-* file) ################################################################## # # *1* base configuration information and linkage # ################################################################## # The PREFIX is the base of where ICU is installed. # Inside this directory you should find bin, lib, include/unicode, # etc. If ICU is not installed in this directory, you must change the # following line. There should exist ${prefix}/include/unicode/utypes.h # for example. default_prefix="/opt/alt/libicu65/usr" if [ "x${prefix}" = "x" ]; then prefix="$default_prefix"; fi exec_prefix="/opt/alt/libicu65/usr" libdir="/opt/alt/libicu65/usr/lib64" libexecdir="/opt/alt/libicu65/usr/libexec" bindir="/opt/alt/libicu65/usr/bin" datarootdir="${prefix}/share" datadir="/opt/alt/libicu65/usr/share" sbindir="/opt/alt/libicu65/usr/sbin" # about the ICU version VERSION="65.1" UNICODE_VERSION="12.1" # The prefix for ICU libraries, normally 'icu' ICUPREFIX="icu" PACKAGE="icu" LIBICU="lib${ICUPREFIX}" # Static library prefix and file extension STATIC_PREFIX="s" LIBSICU="lib${STATIC_PREFIX}${ICUPREFIX}" A="a" # Suffix at the end of libraries. Usually empty. ICULIBSUFFIX="" # ICULIBSUFFIX_VERSION is non-empty if it is to contain a library # version. For example, if it is 21, it means libraries are named # libicuuc21.so for example. # rpath links a library search path right into the binaries. ## mh-files MUST NOT override RPATHLDFLAGS unless they provide ## equivalent '#SH#' lines for icu-config fixup default_ENABLE_RPATH="NO" if [ "x${ENABLE_RPATH}" = "x" ]; then ENABLE_RPATH="$default_ENABLE_RPATH"; fi RPATHLDFLAGS="${LD_RPATH}${LD_RPATH_PRE}${libdir}" # icu-config version of above 'if': case "x$ENABLE_RPATH" in x[yY]*) ENABLE_RPATH=YES RPATHLDFLAGS="${LD_RPATH}${LD_RPATH_PRE}${libdir}" ;; x[nN]*) ENABLE_RPATH=NO RPATHLDFLAGS="" ;; x) ENABLE_RPATH=NO RPATHLDFLAGS="" ;; *) echo $0: Unknown --enable-rpath value ${ENABLE_RPATH} 1>&2 exit 3 ;; esac # Name flexibility for the library naming scheme. Any modifications should # be made in the mh- file for the specific platform. DATA_STUBNAME="data" COMMON_STUBNAME="uc" I18N_STUBNAME="i18n" LAYOUTEX_STUBNAME="lx" IO_STUBNAME="io" TOOLUTIL_STUBNAME="tu" CTESTFW_STUBNAME="test" ### To link your application with ICU: # 1. use LDFLAGS, CFLAGS, etc from above # 2. link with ${ICULIBS} # 3. optionally, add one or more of: # - ${ICULIBS_I18N} - i18n library, formatting, etc. # - ${ICULIBS_ICUIO} - ICU stdio equivalent library ICULIBS_COMMON="-l${ICUPREFIX}uc${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}" ICULIBS_DATA="-l${ICUPREFIX}${DATA_STUBNAME}${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}" ICULIBS_I18N="-l${ICUPREFIX}${I18N_STUBNAME}${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}" ICULIBS_TOOLUTIL="-l${ICUPREFIX}tu${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}" ICULIBS_CTESTFW="-l${ICUPREFIX}ctestfw${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}" ICULIBS_ICUIO="-l${ICUPREFIX}io${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}" ICULIBS_OBSOLETE="-l${ICUPREFIX}obsolete${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}" ICULIBS_LAYOUTEX="-l${ICUPREFIX}lx${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}" ICULIBS_BASE="-L${libdir}" # for icu-config to test with ICULIBS_COMMON_LIB_NAME="${LIBICU}${COMMON_STUBNAME}${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}.${SO}" ICULIBS_COMMON_LIB_NAME_A="${LIBICU}${COMMON_STUBNAME}${ICULIBSUFFIX}.${A}" # ICULIBS is the set of libraries your application should link # with usually. Many applications will want to add ${ICULIBS_I18N} as well. ICULIBS="${ICULIBS_BASE} ${ICULIBS_I18N} ${ICULIBS_COMMON} ${ICULIBS_DATA} " # Proper echo newline handling is needed in icu-config ECHO_N="-n" ECHO_C="" # Not currently being used but good to have for proper tab handling ECHO_T="" ################################################################## # # *2* access to ICU tools # ################################################################## # Environment variable to set a runtime search path # (Overridden when necessary in -mh files) LDLIBRARYPATH_ENVVAR="LD_LIBRARY_PATH" # Versioned target for a shared library ## FINAL_SO_TARGET = ${SO_TARGET}.${SO_TARGET_VERSION} ## MIDDLE_SO_TARGET = ${SO_TARGET}.${SO_TARGET_VERSION_MAJOR} # Access to important ICU tools. # Use as follows: ${INVOKE} ${GENRB} arguments .. INVOKE="${LDLIBRARYPATH_ENVVAR}=${libdir}:$$${LDLIBRARYPATH_ENVVAR} ${LEAK_CHECKER}" GENCCODE="${sbindir}/genccode" ICUPKG="${sbindir}/icupkg" GENCMN="${sbindir}/gencmn" GENRB="${bindir}/genrb" PKGDATA="${bindir}/pkgdata" # moved here because of dependencies pkgdatadir="${datadir}/${PACKAGE}${ICULIBSUFFIX}/${VERSION}" pkglibdir="${libdir}/${PACKAGE}${ICULIBSUFFIX}/${VERSION}" ################################################################## # # *3* Information about the host # ################################################################## # Information about the host that 'configure' was run on. host="x86_64-redhat-linux-gnu" host_alias="x86_64-redhat-linux-gnu" host_cpu="x86_64" host_vendor="redhat" host_os="linux-gnu" # Our platform canonical name (as determined by configure) # this is a #define value (i.e. U_XXXX or XXXX) platform="U_LINUX" ################################################################## # # *4* compiler flags and misc. options # ################################################################## AR="ar" # initial tab keeps it out of the shell version. ARFLAGS=" ${ARFLAGS}" CC="gcc" CPP="gcc -E" CFLAGS="" CPPFLAGS="-I${prefix}/include" CXXFLAGS="-std=c++11" CXX="g++" DEFAULT_MODE="dll" DEFS="-DPACKAGE_NAME=\"ICU\" -DPACKAGE_TARNAME=\"International\ Components\ for\ Unicode\" -DPACKAGE_VERSION=\"65.1\" -DPACKAGE_STRING=\"ICU\ 65.1\" -DPACKAGE_BUGREPORT=\"http://icu-project.org/bugs\" -DPACKAGE_URL=\"http://icu-project.org\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DSIZEOF_VOID_P=8 -DHAVE_LIBM=1 -DHAVE_ELF_H=1 -DHAVE_DLFCN_H=1 -DHAVE_DLOPEN=1 -DHAVE_GETTIMEOFDAY=1 -DHAVE_LIBPTHREAD=1 -DHAVE_INTTYPES_H=1 -DHAVE_DIRENT_H=1 -DHAVE_WCHAR_H=1 -DSIZEOF_WCHAR_T=4 " # use a consistent INSTALL INSTALL="${SHELL} ${pkgdatadir}/install-sh -c" INSTALL_DATA="${INSTALL} -m 644" INSTALL_PROGRAM="${INSTALL}" INSTALL_SCRIPT="${INSTALL}" LDFLAGS="${RPATHLDFLAGS}" LIBS="-lpthread -ldl -lm " LIB_M="" LIB_VERSION="65.1" LIB_VERSION_MAJOR="65" MKINSTALLDIRS="${SHELL} ${pkgdatadir}/mkinstalldirs" RANLIB="ranlib" RMV="rm -rf" SHELL="/bin/sh" SHLIB_c="${CC} ${DEFS} ${CPPFLAGS} ${CFLAGS} ${LDFLAGS} -shared" SHLIB_cc="${CXX} ${DEFS} ${CPPFLAGS} ${CXXFLAGS} ${LDFLAGS} -shared" U_IS_BIG_ENDIAN="0" includedir="/opt/alt/libicu65/usr/include" infodir="/opt/alt/libicu65/usr/share/info" localstatedir="/var" mandir="/opt/alt/libicu65/usr/share/man" oldincludedir="/usr/include" program_transform_name="s,x,x," sharedstatedir="/var/lib" sysconfdir="/etc" INSTALL_L="${INSTALL_DATA}" # for derivative builds - don't bother with VERBOSE/NONVERBOSE SILENT_COMPILE ################################################################## # # *5* packaging options and directories # ################################################################## # The basename of the ICU data file (i.e. icudt21b ) ICUDATA_CHAR="l" ICUDATA_NAME="icudt65l" # Defaults for pkgdata's mode and directories # The default data dir changes depending on what packaging mode # is being used if [ "x$PKGDATA_MODE" = "x" ]; then PKGDATA_MODE="dll" fi case "$PKGDATA_MODE" in common) ICUDATA_DIR="${pkgdatadir}" ICUPKGDATA_DIR="${ICUDATA_DIR}" ;; dll) ICUDATA_DIR="${pkgdatadir}" ICUPKGDATA_DIR="${libdir}" ;; *) ICUDATA_DIR="${pkgdatadir}" ICUPKGDATA_DIR="${ICUDATA_DIR}" ;; esac GENCCODE_ASSEMBLY="-a gcc" ################################################################## # # *6* Inclusion of platform make fragment (mh-* file) # ################################################################## # The mh- file ("make fragment") for the platform is included here. # It may override the above settings. # It is put last so that the mh-file can override anything. # The selfcheck is just a sanity check that this makefile is # parseable. The mh fragment is only included if this does not occur. # Following from ./config/mh-linux ## -*-makefile-*- ## Copyright (C) 2016 and later: Unicode, Inc. and others. ## License & terms of use: http://www.unicode.org/copyright.html ## Linux-specific setup ## Copyright (c) 1999-2013, International Business Machines Corporation and ## others. All Rights Reserved. ## Commands to generate dependency files GEN_DEPS_c="${CC} -E -MM ${DEFS} ${CPPFLAGS}" GEN_DEPS_cc="${CXX} -E -MM ${DEFS} ${CPPFLAGS} ${CXXFLAGS}" ## Flags for position independent code SHAREDLIBCFLAGS="-fPIC" SHAREDLIBCXXFLAGS="-fPIC" SHAREDLIBCPPFLAGS="-DPIC" ## Additional flags when building libraries and with threads THREADSCPPFLAGS="-D_REENTRANT" LIBCPPFLAGS="" ## Compiler switch to embed a runtime search path LD_RPATH="-Wl,-zorigin,-rpath,\$\$ORIGIN " LD_RPATH_PRE="-Wl,-rpath," ## These are the library specific LDFLAGS LDFLAGSICUDT="" ## Compiler switch to embed a library name # The initial tab in the next line is to prevent icu-config from reading it. # We can't depend on MIDDLE_SO_TARGET being set. LD_SONAME= ## Shared library options LD_SOOPTIONS="-Wl,-Bsymbolic" ## Shared object suffix SO="so" ## Non-shared intermediate object suffix STATIC_O="ao" ## Compilation rules ## Dependency rules ## Versioned libraries rules ## Bind internal references # LDflags that pkgdata will use BIR_LDFLAGS="-Wl,-Bsymbolic" # Dependencies [i.e. map files] for the final library BIR_DEPS="" ## Remove shared library 's' STATIC_PREFIX_WHEN_USED="" STATIC_PREFIX="" ## End Linux-specific setup ## -*-sh-*- ## BEGIN of icu-config-bottom. ## Copyright (C) 2016 and later: Unicode, Inc. and others. ## License & terms of use: http://www.unicode.org/copyright.html ## Copyright (c) 2002-2013, International Business Machines Corporation and ## others. All Rights Reserved. ICUUC_FILE="${libdir}/${ICULIBS_COMMON_LIB_NAME}" ICUUC_FILE_A="${libdir}/${ICULIBS_COMMON_LIB_NAME_A}" # echo ENABLE RPATH $ENABLE_RPATH and RPATHLDFLAGS=${RPATH_LDFLAGS} if [ "x$PKGDATA_MODE" = "x" ]; then PKGDATA_MODE=dll fi } ## The actual code of icu-config goes here. ME=`basename "$0"` allflags() { echo " --noverify Don't verify that ICU is actually installed." echo " --bindir Print binary directory path (bin)" echo " --cc Print C compiler used [CC]" echo " --cflags Print C compiler flags [CFLAGS]" echo " --cflags-dynamic Print additional C flags for" echo " building shared libraries." echo " --cppflags Print C Preprocessor flags [CPPFLAGS]" echo " --cppflags-dynamic Print additional C Preprocessor flags for" echo " building shared libraries." echo " --cppflags-searchpath Print only -I include directives (-Iinclude)" echo " --cxx Print C++ compiler used [CXX]" echo " --cxxflags Print C++ compiler flags [CXXFLAGS]" echo " --cxxflags-dynamic Print additional C++ flags for" echo " building shared libraries." echo " --detect-prefix Attempt to detect prefix based on PATH" echo " --exec-prefix Print prefix for executables (/bin)" echo " --exists Return with 0 status if ICU exists else fail" echo " --help, -?, --usage Print this message" echo " --icudata Print shortname of ICU data file (icudt21l)" echo " --icudata-install-dir Print path to install data to - use as --install option to pkgdata(1)" echo " --icudata-mode Print default ICU pkgdata mode (dll) - use as --mode option to pkgdata(1)." echo " --icudatadir Print path to packaged archive data. Can set as [ICU_DATA]" echo " --invoke Print commands to invoke an ICU program" echo " --invoke=<prog> Print commands to invoke an ICU program named <prog> (ex: genrb)" echo " --ldflags Print -L search path and -l libraries to link with ICU [LDFLAGS]. This is for the data, uc (common), and i18n libraries only. " echo " --ldflags-libsonly Same as --ldflags, but only the -l directives" echo " --ldflags-searchpath Print only -L (search path) directive" echo " --ldflags-system Print only system libs ICU links with (-lpthread, -lm)" echo " --ldflags-icuio Print ICU icuio link directive. Use in addition to --ldflags " echo " --ldflags-obsolete Print ICU obsolete link directive. Use in addition to --ldflags. (requires icuapps/obsolete to be built and installed.) " echo " --mandir Print manpage (man) path" echo " --prefix Print PREFIX to icu install (/usr/local)" echo " --prefix=XXX Set prefix to XXX for remainder of command" echo " --sbindir Print system binary path (sbin) " echo " --shared-datadir Print shared data (share) path. This is NOT the ICU data dir." echo " --shlib-c Print the command to compile and build C shared libraries with ICU" echo " --shlib-cc Print the command to compile and build C++ shared libraries with ICU" echo " --sysconfdir Print system config (etc) path" echo " --unicode-version Print version of Unicode data used in ICU ($UNICODE_VERSION)" echo " --version Print ICU version ($VERSION)" echo " --incfile Print path to Makefile.inc" echo " --incpkgdatafile Print path to pkgdata.inc (for -O option of pkgdata)" echo " --install Print path to install-sh" echo " --mkinstalldirs Print path to mkinstalldirs" } ## Print the normal usage message shortusage() { echo "usage: ${ME} " `allflags | cut -c-25 | sed -e 's%.*%[ & ]%'` } usage() { echo "${ME}: icu-config: ICU configuration helper script" echo echo "The most commonly used options will be --cflags, --cxxflags, --cppflags, and --ldflags." echo 'Example (in make): CPFLAGS=$(shell icu-config --cppflags)' echo ' LDFLAGS=$(shell icu-config --ldflags)' echo " (etc).." echo echo "Usage:" allflags echo echo " [Brackets] show MAKE variable equivalents, (parenthesis) show example output" echo echo "Copyright (c) 2002-2013, International Business Machines Corporation and others. All Rights Reserved." echo echo "NOTE: Please consider using the pkg-config (.pc) files instead of icu-config." echo " See: <http://userguide.icu-project.org/howtouseicu#TOC-pkg-config> " } ## Check the sanity of current variables sanity() { if [ ! -f "${ICUUC_FILE}" -a ! -f "${ICUUC_FILE_A}" ] && [ ${IGNORE_ICUUC_FILE_CHECK} = "no" ] && [ ${SANITY} = "sane" ]; then echo "### $ME: Can't find ${ICUUC_FILE} - ICU prefix is wrong." 1>&2 echo "### Try the --prefix= option " 1>&2 echo "### or --detect-prefix" 1>&2 echo "### (If you want to disable this check, use the --noverify option)" 1>&2 echo "### $ME: Exitting." 1>&2 exit 2 fi } ## Main starts here. if [ $# -lt 1 ]; then shortusage exit 1 fi # For certain options (e.g. --detect-prefix) don't check for icuuc library file. IGNORE_ICUUC_FILE_CHECK="no"; SANITY="sane" case "$1" in --noverify) SANITY="nosanity" shift ;; esac case "$1" in *prefix*) IGNORE_ICUUC_FILE_CHECK="yes" ;; esac # Load our variables from autoconf # ALWAYS load twice because of dependencies loaddefs loaddefs if [ $# -gt 0 -a $1 = "--selfcheck" ]; then echo "passed" exit # EXIT for self check fi sanity while [ $# -gt 0 ]; do arg="$1" var=`echo $arg | sed -e 's/^[^=]*=//'` # echo "### processing $arg" 1>&2 case "$arg" in # undocumented. --debug) set -x ;; --noverify) echo "### $ME: Error: --noverify must be the first argument." 1>&2 exit 1 ;; --so) echo $SO ;; --bindir) echo $bindir ;; --libdir) echo $libdir ;; --exists) sanity ;; --sbindir) echo $sbindir ;; --mkinstalldirs) echo ${MKINSTALLDIRS} ;; --install) echo ${INSTALL} ;; --invoke=*) QUOT="\"" CMD="${var}" # If it's not a locally executable command (1st choice) then # search for it in the ICU directories. if [ ! -x ${CMD} ]; then if [ -x ${bindir}/${var} ]; then CMD="${bindir}/${var}" fi if [ -x ${sbindir}/${var} ]; then CMD="${sbindir}/${var}" fi fi echo "env ${QUOT}${LDLIBRARYPATH_ENVVAR}=${libdir}:"'${'"${LDLIBRARYPATH_ENVVAR}"'}'${QUOT} ${CMD} ;; --invoke) QUOT="\"" echo "env ${QUOT}${LDLIBRARYPATH_ENVVAR}=${libdir}:"'${'"${LDLIBRARYPATH_ENVVAR}"'}'${QUOT} ;; --cflags) echo $ECHO_N "${CFLAGS} ${ECHO_C}" ;; --cc) echo $ECHO_N "${CC} ${ECHO_C}" ;; --cxx) echo $ECHO_N "${CXX} ${ECHO_C}" ;; --cxxflags) echo $ECHO_N "${CXXFLAGS} ${ECHO_C}" ;; --cppflags) # Don't echo the -I. - it's unneeded. echo $ECHO_N "${CPPFLAGS} ${ECHO_C}" | sed -e 's/-I. //' ;; --cppflags-searchpath) echo $ECHO_N "-I${prefix}/include ${ECHO_C}" ;; --cppflags-dynamic) echo $ECHO_N "${SHAREDLIBCPPFLAGS} ${ECHO_C}" ;; --cxxflags-dynamic) echo $ECHO_N "${SHAREDLIBCXXFLAGS} ${ECHO_C}" ;; --cflags-dynamic) echo $ECHO_N "${SHAREDLIBCFLAGS} ${ECHO_C}" ;; --ldflags-system) echo $ECHO_N "${LIBS} ${ECHO_C}" ;; --ldflags) echo $ECHO_N "${LDFLAGS} ${ICULIBS} ${ECHO_C}" # $RPATH_LDFLAGS ;; --ldflags-libsonly) echo $ECHO_N "${ICULIBS_I18N} ${ICULIBS_COMMON} ${ICULIBS_DATA} ${ECHO_C}" ;; --ldflags-icuio) echo $ECHO_N " ${ICULIBS_ICUIO} ${ECHO_C}" ;; --ldflags-obsolete) echo $ECHO_N "${ICULIBS_OBSOLETE} ${ECHO_C}" ;; --ldflags-toolutil) echo $ECHO_N " ${ICULIBS_TOOLUTIL} ${ECHO_C}" ;; --ldflags-layout) echo ${ME}: ERROR: the old layout engine has been removed. use HarfBuzz. exit 1 ;; --ldflags-searchpath) echo $ECHO_N "-L${libdir} ${ECHO_C}" ;; --detect-prefix) HERE=`echo $0 | sed -e "s/$ME//g"` if [ -f "${HERE}/../lib/${ICULIBS_COMMON_LIB_NAME}" -o -f "${HERE}/../lib/${ICULIBS_COMMON_LIB_NAME_A}" ]; then prefix="${HERE}/.." echo "## Using --prefix=${prefix}" 1>&2 fi loaddefs loaddefs ;; --exec-prefix) echo $exec_prefix ;; --prefix) echo $prefix ;; --prefix=*) prefix=$var loaddefs loaddefs ;; --sysconfdir) echo $sysconfdir ;; --mandir) echo $mandir ;; --shared-datadir) echo $ECHO_N "${datadir} ${ECHO_C}" ;; --incfile) echo $ECHO_N "${pkglibdir}/Makefile.inc ${ECHO_C}" ;; --incpkgdatafile) echo $ECHO_N "${pkglibdir}/pkgdata.inc ${ECHO_C}" ;; --icudata) echo $ECHO_N "${ICUDATA_NAME} ${ECHO_C}" ;; --icudata-mode) echo $ECHO_N "${PKGDATA_MODE} ${ECHO_C}" ;; --icudata-install-dir) echo $ECHO_N "${ICUPKGDATA_DIR} ${ECHO_C}" ;; --icudatadir) echo $ECHO_N "${ICUDATA_DIR} ${ECHO_C}" ;; --shlib-c) echo $ECHO_N "${SHLIB_c} ${ECHO_C}" ;; --shlib-cc) echo $ECHO_N "${SHLIB_cc} ${ECHO_C}" ;; --version) echo $ECHO_N $VERSION ;; --unicode-version) echo $ECHO_N $UNICODE_VERSION ;; --host) echo $host exit 0 ;; --help) usage exit 0 ;; --usage) usage exit 0 ;; # --enable-rpath=*) # ENABLE_RPATH=$var # loaddefs # ;; -?) usage exit 0 ;; *) echo ${ME}: ERROR Unknown Option $arg 1>&2 echo 1>&2 shortusage 1>&2 echo "### $ME: Exitting." 1>&2 exit 1; ;; esac shift # Reset the ignore icuuc file check flag if [ $IGNORE_ICUUC_FILE_CHECK = "yes" ]; then IGNORE_ICUUC_FILE_CHECK="no" sanity fi done echo # Check once before we quit (will check last used prefix) sanity ## END of icu-config-bottom exit 0
Save File
Cancel