← Back
Editing: http_request.h
/* Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. * The ASF licenses this file to You under the Apache License, Version 2.0 * (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /** * @file http_request.h * @brief Apache Request library * * @defgroup APACHE_CORE_REQ Apache Request Processing * @ingroup APACHE_CORE * @{ */ /* * request.c is the code which handles the main line of request * processing, once a request has been read in (finding the right per- * directory configuration, building it if necessary, and calling all * the module dispatch functions in the right order). * * The pieces here which are public to the modules, allow them to learn * how the server would handle some other file or URI, or perhaps even * direct the server to serve that other file instead of the one the * client requested directly. * * There are two ways to do that. The first is the sub_request mechanism, * which handles looking up files and URIs as adjuncts to some other * request (e.g., directory entries for multiviews and directory listings); * the lookup functions stop short of actually running the request, but * (e.g., for includes), a module may call for the request to be run * by calling run_sub_req. The space allocated to create sub_reqs can be * reclaimed by calling destroy_sub_req --- be sure to copy anything you care * about which was allocated in its apr_pool_t elsewhere before doing this. */ #ifndef APACHE_HTTP_REQUEST_H #define APACHE_HTTP_REQUEST_H #include "apr_optional.h" #include "util_filter.h" #ifdef __cplusplus extern "C" { #endif #define AP_SUBREQ_NO_ARGS 0 #define AP_SUBREQ_MERGE_ARGS 1 /** * An internal handler used by the ap_process_request, all subrequest mechanisms * and the redirect mechanism. * @param r The request, subrequest or internal redirect to pre-process * @return The return code for the request */ AP_DECLARE(int) ap_process_request_internal(request_rec *r); /** * Create a subrequest from the given URI. This subrequest can be * inspected to find information about the requested URI * @param new_uri The URI to lookup * @param r The current request * @param next_filter The first filter the sub_request should use. If this is * NULL, it defaults to the first filter for the main request * @return The new request record */ AP_DECLARE(request_rec *) ap_sub_req_lookup_uri(const char *new_uri, const request_rec *r, ap_filter_t *next_filter); /** * Create a subrequest for the given file. This subrequest can be * inspected to find information about the requested file * @param new_file The file to lookup * @param r The current request * @param next_filter The first filter the sub_request should use. If this is * NULL, it defaults to the first filter for the main request * @return The new request record */ AP_DECLARE(request_rec *) ap_sub_req_lookup_file(const char *new_file, const request_rec *r, ap_filter_t *next_filter); /** * Create a subrequest for the given apr_dir_read result. This subrequest * can be inspected to find information about the requested file * @param finfo The apr_dir_read result to lookup * @param r The current request * @param subtype What type of subrequest to perform, one of; * <PRE> * AP_SUBREQ_NO_ARGS ignore r->args and r->path_info * AP_SUBREQ_MERGE_ARGS merge r->args and r->path_info * </PRE> * @param next_filter The first filter the sub_request should use. If this is * NULL, it defaults to the first filter for the main request * @return The new request record * @note The apr_dir_read flags value APR_FINFO_MIN|APR_FINFO_NAME flag is the * minimum recommended query if the results will be passed to apr_dir_read. * The file info passed must include the name, and must have the same relative * directory as the current request. */ AP_DECLARE(request_rec *) ap_sub_req_lookup_dirent(const apr_finfo_t *finfo, const request_rec *r, int subtype, ap_filter_t *next_filter); /** * Create a subrequest for the given URI using a specific method. This * subrequest can be inspected to find information about the requested URI * @param method The method to use in the new subrequest * @param new_uri The URI to lookup * @param r The current request * @param next_filter The first filter the sub_request should use. If this is * NULL, it defaults to the first filter for the main request * @return The new request record */ AP_DECLARE(request_rec *) ap_sub_req_method_uri(const char *method, const char *new_uri, const request_rec *r, ap_filter_t *next_filter); /** * An output filter to strip EOS buckets from sub-requests. This always * has to be inserted at the end of a sub-requests filter stack. * @param f The current filter * @param bb The brigade to filter * @return status code */ AP_CORE_DECLARE_NONSTD(apr_status_t) ap_sub_req_output_filter(ap_filter_t *f, apr_bucket_brigade *bb); /** * Run the handler for the subrequest * @param r The subrequest to run * @return The return code for the subrequest */ AP_DECLARE(int) ap_run_sub_req(request_rec *r); /** * Free the memory associated with a subrequest * @param r The subrequest to finish */ AP_DECLARE(void) ap_destroy_sub_req(request_rec *r); /* * Then there's the case that you want some other request to be served * as the top-level request INSTEAD of what the client requested directly. * If so, call this from a handler, and then immediately return OK. */ /** * Redirect the current request to some other uri * @param new_uri The URI to replace the current request with * @param r The current request */ AP_DECLARE(void) ap_internal_redirect(const char *new_uri, request_rec *r); /** * This function is designed for things like actions or CGI scripts, when * using AddHandler, and you want to preserve the content type across * an internal redirect. * @param new_uri The URI to replace the current request with. * @param r The current request */ AP_DECLARE(void) ap_internal_redirect_handler(const char *new_uri, request_rec *r); /** * Redirect the current request to a sub_req, merging the pools * @param sub_req A subrequest created from this request * @param r The current request * @note the sub_req's pool will be merged into r's pool, be very careful * not to destroy this subrequest, it will be destroyed with the main request! */ AP_DECLARE(void) ap_internal_fast_redirect(request_rec *sub_req, request_rec *r); /** * Can be used within any handler to determine if any authentication * is required for the current request * @param r The current request * @return 1 if authentication is required, 0 otherwise * @bug Behavior changed in 2.4.x refactoring, API no longer usable * @deprecated @see ap_some_authn_required() */ AP_DECLARE(int) ap_some_auth_required(request_rec *r); /** * @defgroup APACHE_CORE_REQ_AUTH Access Control for Sub-Requests and * Internal Redirects * @ingroup APACHE_CORE_REQ * @{ */ #define AP_AUTH_INTERNAL_PER_URI 0 /**< Run access control hooks on all internal requests with URIs distinct from that of initial request */ #define AP_AUTH_INTERNAL_PER_CONF 1 /**< Run access control hooks only on internal requests with configurations distinct from that of initial request */ #define AP_AUTH_INTERNAL_MASK 0x000F /**< mask to extract internal request processing mode */ /** * Clear flag which determines when access control hooks will be run for * internal requests. */ AP_DECLARE(void) ap_clear_auth_internal(void); /** * Determine whether access control hooks will be run for all internal * requests with URIs distinct from that of the initial request, or only * those for which different configurations apply than those which applied * to the initial request. To accommodate legacy external modules which * may expect access control hooks to be run for all internal requests * with distinct URIs, this is the default behaviour unless all access * control hooks and authentication and authorization providers are * registered with AP_AUTH_INTERNAL_PER_CONF. * @param ptemp Pool used for temporary allocations */ AP_DECLARE(void) ap_setup_auth_internal(apr_pool_t *ptemp); /** * Register an authentication or authorization provider with the global * provider pool. * @param pool The pool to create any storage from * @param provider_group The group to store the provider in * @param provider_name The name for this provider * @param provider_version The version for this provider * @param provider Opaque structure for this provider * @param type Internal request processing mode, either * AP_AUTH_INTERNAL_PER_URI or AP_AUTH_INTERNAL_PER_CONF * @return APR_SUCCESS if all went well */ AP_DECLARE(apr_status_t) ap_register_auth_provider(apr_pool_t *pool, const char *provider_group, const char *provider_name, const char *provider_version, const void *provider, int type); /** @} */ /* Optional functions coming from mod_authn_core and mod_authz_core * that list all registered authn/z providers. */ APR_DECLARE_OPTIONAL_FN(apr_array_header_t *, authn_ap_list_provider_names, (apr_pool_t *ptemp)); APR_DECLARE_OPTIONAL_FN(apr_array_header_t *, authz_ap_list_provider_names, (apr_pool_t *ptemp)); /** * Determine if the current request is the main request or a subrequest * @param r The current request * @return 1 if this is the main request, 0 otherwise */ AP_DECLARE(int) ap_is_initial_req(request_rec *r); /** * Function to set the r->mtime field to the specified value if it's later * than what's already there. * @param r The current request * @param dependency_mtime Time to set the mtime to */ AP_DECLARE(void) ap_update_mtime(request_rec *r, apr_time_t dependency_mtime); /** * Add one or more methods to the list permitted to access the resource. * Usually executed by the content handler before the response header is * sent, but sometimes invoked at an earlier phase if a module knows it * can set the list authoritatively. Note that the methods are ADDED * to any already permitted unless the reset flag is non-zero. The * list is used to generate the Allow response header field when it * is needed. * @param r The pointer to the request identifying the resource. * @param reset Boolean flag indicating whether this list should * completely replace any current settings. * @param ... A NULL-terminated list of strings, each identifying a * method name to add. * @return None. */ AP_DECLARE(void) ap_allow_methods(request_rec *r, int reset, ...) AP_FN_ATTR_SENTINEL; /** * Add one or more methods to the list permitted to access the resource. * Usually executed by the content handler before the response header is * sent, but sometimes invoked at an earlier phase if a module knows it * can set the list authoritatively. Note that the methods are ADDED * to any already permitted unless the reset flag is non-zero. The * list is used to generate the Allow response header field when it * is needed. * @param r The pointer to the request identifying the resource. * @param reset Boolean flag indicating whether this list should * completely replace any current settings. * @param ... A list of method identifiers, from the "M_" series * defined in httpd.h, terminated with a value of -1 * (e.g., "M_GET, M_POST, M_OPTIONS, -1") * @return None. */ AP_DECLARE(void) ap_allow_standard_methods(request_rec *r, int reset, ...); #define MERGE_ALLOW 0 #define REPLACE_ALLOW 1 /** * Process a top-level request from a client, and synchronously write * the response to the client * @param r The current request */ AP_DECLARE(void) ap_process_request(request_rec *r); /* For post-processing after a handler has finished with a request. * (Commonly used after it was suspended) */ AP_DECLARE(void) ap_process_request_after_handler(request_rec *r); /** * Process a top-level request from a client, allowing some or all of * the response to remain buffered in the core output filter for later, * asynchronous write completion * @param r The current request */ void ap_process_async_request(request_rec *r); /** * Kill the current request * @param type Why the request is dying * @param r The current request */ AP_DECLARE(void) ap_die(int type, request_rec *r); /** * Check whether a connection is still established and has data available, * optionally consuming blank lines ([CR]LF). * @param c The current connection * @param bb The brigade to filter * @param max_blank_lines Max number of blank lines to consume, or zero * to consider them as data (single read). * @return APR_SUCCESS: connection established with data available, * APR_EAGAIN: connection established and empty, * APR_NOTFOUND: too much blank lines, * APR_E*: connection/general error. */ AP_DECLARE(apr_status_t) ap_check_pipeline(conn_rec *c, apr_bucket_brigade *bb, unsigned int max_blank_lines); /* Hooks */ /** * Gives modules a chance to create their request_config entry when the * request is created. * @param r The current request * @ingroup hooks */ AP_DECLARE_HOOK(int,create_request,(request_rec *r)) /** * This hook allow modules an opportunity to translate the URI into an * actual filename, before URL decoding happens. * @param r The current request * @return DECLINED to let other modules handle the pre-translation, * OK if it was handled and no other module should process it, * DONE if no further transformation should happen on the URI, * HTTP_... in case of error. * @ingroup hooks */ AP_DECLARE_HOOK(int,pre_translate_name,(request_rec *r)) /** * This hook allow modules an opportunity to translate the URI into an * actual filename. If no modules do anything special, the server's default * rules will be followed. * @param r The current request * @return OK, DECLINED, or HTTP_... * @ingroup hooks */ AP_DECLARE_HOOK(int,translate_name,(request_rec *r)) /** * This hook allow modules to set the per_dir_config based on their own * context (such as "<Proxy>" sections) and responds to contextless requests * such as TRACE that need no security or filesystem mapping. * based on the filesystem. * @param r The current request * @return DONE (or HTTP_) if this contextless request was just fulfilled * (such as TRACE), OK if this is not a file, and DECLINED if this is a file. * The core map_to_storage (HOOK_RUN_REALLY_LAST) will directory_walk * and file_walk the r->filename. * * @ingroup hooks */ AP_DECLARE_HOOK(int,map_to_storage,(request_rec *r)) /** * This hook is used to analyze the request headers, authenticate the user, * and set the user information in the request record (r->user and * r->ap_auth_type). This hook is only run when Apache determines that * authentication/authorization is required for this resource (as determined * by the 'Require' directive). It runs after the access_checker hook, and * before the auth_checker hook. This hook should be registered with * ap_hook_check_authn(). * * @param r The current request * @return OK, DECLINED, or HTTP_... * @ingroup hooks * @see ap_hook_check_authn */ AP_DECLARE_HOOK(int,check_user_id,(request_rec *r)) /** * Allows modules to perform module-specific fixing of header fields. This * is invoked just before any content-handler * @param r The current request * @return OK, DECLINED, or HTTP_... * @ingroup hooks */ AP_DECLARE_HOOK(int,fixups,(request_rec *r)) /** * This routine is called to determine and/or set the various document type * information bits, like Content-type (via r->content_type), language, et * cetera. * @param r the current request * @return OK, DECLINED, or HTTP_... * @ingroup hooks */ AP_DECLARE_HOOK(int,type_checker,(request_rec *r)) /** * This hook is used to apply additional access control to this resource. * It runs *before* a user is authenticated, so this hook is really to * apply additional restrictions independent of a user. It also runs * independent of 'Require' directive usage. This hook should be registered * with ap_hook_check_access(). * * @param r the current request * @return OK, DECLINED, or HTTP_... * @ingroup hooks * @see ap_hook_check_access */ AP_DECLARE_HOOK(int,access_checker,(request_rec *r)) /** * This hook is used to apply additional access control and/or bypass * authentication for this resource. It runs *before* a user is authenticated, * but after the auth_checker hook. * This hook should be registered with ap_hook_check_access_ex(). * * @param r the current request * @return OK (allow access), DECLINED (let later modules decide), * or HTTP_... (deny access) * @ingroup hooks * @see ap_hook_check_access_ex */ AP_DECLARE_HOOK(int,access_checker_ex,(request_rec *r)) /** * This hook is used to check to see if the resource being requested * is available for the authenticated user (r->user and r->ap_auth_type). * It runs after the access_checker and check_user_id hooks. Note that * it will *only* be called if Apache determines that access control has * been applied to this resource (through a 'Require' directive). This * hook should be registered with ap_hook_check_authz(). * * @param r the current request * @return OK, DECLINED, or HTTP_... * @ingroup hooks * @see ap_hook_check_authz */ AP_DECLARE_HOOK(int,auth_checker,(request_rec *r)) /** * Register a hook function that will apply additional access control to * the current request. * @param pf An access_checker hook function * @param aszPre A NULL-terminated array of strings that name modules whose * hooks should precede this one * @param aszSucc A NULL-terminated array of strings that name modules whose * hooks should succeed this one * @param nOrder An integer determining order before honouring aszPre and * aszSucc (for example, HOOK_MIDDLE) * @param type Internal request processing mode, either * AP_AUTH_INTERNAL_PER_URI or AP_AUTH_INTERNAL_PER_CONF */ AP_DECLARE(void) ap_hook_check_access(ap_HOOK_access_checker_t *pf, const char * const *aszPre, const char * const *aszSucc, int nOrder, int type); /** * Register a hook function that will apply additional access control * and/or bypass authentication for the current request. * @param pf An access_checker_ex hook function * @param aszPre A NULL-terminated array of strings that name modules whose * hooks should precede this one * @param aszSucc A NULL-terminated array of strings that name modules whose * hooks should succeed this one * @param nOrder An integer determining order before honouring aszPre and * aszSucc (for example, HOOK_MIDDLE) * @param type Internal request processing mode, either * AP_AUTH_INTERNAL_PER_URI or AP_AUTH_INTERNAL_PER_CONF */ AP_DECLARE(void) ap_hook_check_access_ex(ap_HOOK_access_checker_ex_t *pf, const char * const *aszPre, const char * const *aszSucc, int nOrder, int type); /** * Register a hook function that will analyze the request headers, * authenticate the user, and set the user information in the request record. * @param pf A check_user_id hook function * @param aszPre A NULL-terminated array of strings that name modules whose * hooks should precede this one * @param aszSucc A NULL-terminated array of strings that name modules whose * hooks should succeed this one * @param nOrder An integer determining order before honouring aszPre and * aszSucc (for example, HOOK_MIDDLE) * @param type Internal request processing mode, either * AP_AUTH_INTERNAL_PER_URI or AP_AUTH_INTERNAL_PER_CONF */ AP_DECLARE(void) ap_hook_check_authn(ap_HOOK_check_user_id_t *pf, const char * const *aszPre, const char * const *aszSucc, int nOrder, int type); /** * Register a hook function that determine if the resource being requested * is available for the currently authenticated user. * @param pf An auth_checker hook function * @param aszPre A NULL-terminated array of strings that name modules whose * hooks should precede this one * @param aszSucc A NULL-terminated array of strings that name modules whose * hooks should succeed this one * @param nOrder An integer determining order before honouring aszPre and * aszSucc (for example, HOOK_MIDDLE) * @param type Internal request processing mode, either * AP_AUTH_INTERNAL_PER_URI or AP_AUTH_INTERNAL_PER_CONF */ AP_DECLARE(void) ap_hook_check_authz(ap_HOOK_auth_checker_t *pf, const char * const *aszPre, const char * const *aszSucc, int nOrder, int type); /** * This hook allows modules to insert filters for the current request * @param r the current request * @ingroup hooks */ AP_DECLARE_HOOK(void,insert_filter,(request_rec *r)) /** * This hook allows modules to affect the request immediately after the * per-directory configuration for the request has been generated. * @param r The current request * @return OK (allow access), DECLINED (let later modules decide), * or HTTP_... (deny access) * @ingroup hooks */ AP_DECLARE_HOOK(int,post_perdir_config,(request_rec *r)) /** * This hook allows a module to force authn to be required when * processing a request. * This hook should be registered with ap_hook_force_authn(). * @param r The current request * @return OK (force authn), DECLINED (let later modules decide) * @ingroup hooks */ AP_DECLARE_HOOK(int,force_authn,(request_rec *r)) /** * This hook allows modules to handle/emulate the apr_stat() calls * needed for directory walk. * @param finfo where to put the stat data * @param r The current request * @param wanted APR_FINFO_* flags to pass to apr_stat() * @return apr_status_t or AP_DECLINED (let later modules decide) * @ingroup hooks */ AP_DECLARE_HOOK(apr_status_t,dirwalk_stat,(apr_finfo_t *finfo, request_rec *r, apr_int32_t wanted)) AP_DECLARE(int) ap_location_walk(request_rec *r); AP_DECLARE(int) ap_directory_walk(request_rec *r); AP_DECLARE(int) ap_file_walk(request_rec *r); AP_DECLARE(int) ap_if_walk(request_rec *r); /** End Of REQUEST (EOR) bucket */ AP_DECLARE_DATA extern const apr_bucket_type_t ap_bucket_type_eor; /** * Determine if a bucket is an End Of REQUEST (EOR) bucket * @param e The bucket to inspect * @return true or false */ #define AP_BUCKET_IS_EOR(e) ((e)->type == &ap_bucket_type_eor) /** * Make the bucket passed in an End Of REQUEST (EOR) bucket * @param b The bucket to make into an EOR bucket * @param r The request to destroy when this bucket is destroyed * @return The new bucket, or NULL if allocation failed */ AP_DECLARE(apr_bucket *) ap_bucket_eor_make(apr_bucket *b, request_rec *r); /** * Create a bucket referring to an End Of REQUEST (EOR). This bucket * holds a pointer to the request_rec, so that the request can be * destroyed right after all of the output has been sent to the client. * * @param list The freelist from which this bucket should be allocated * @param r The request to destroy when this bucket is destroyed * @return The new bucket, or NULL if allocation failed */ AP_DECLARE(apr_bucket *) ap_bucket_eor_create(apr_bucket_alloc_t *list, request_rec *r); /** * Can be used within any handler to determine if any authentication * is required for the current request. Note that if used with an * access_checker hook, an access_checker_ex hook or an authz provider; the * caller should take steps to avoid a loop since this function is * implemented by calling these hooks. * @param r The current request * @return TRUE if authentication is required, FALSE otherwise */ AP_DECLARE(int) ap_some_authn_required(request_rec *r); #ifdef __cplusplus } #endif #endif /* !APACHE_HTTP_REQUEST_H */ /** @} */
Save File
Cancel